#11 Best Graphics Card for 1440p Gaming 2023

The MSI Nvidia GeForce RTX 3070 provides incredible performance. The RTX 3070 is capable of delivering not just seamless 1440p gaming, but also bringing 4K gaming to the masses for the first time. The Ampere GA104 GPU powers the Nvidia GeForce RTX 3070. There are 5,888 CUDA cores distributed among 46 Streaming Multiprocessors on this GPU.

With a TGP (total graphics power) rating of 220W, this one is also the only graphics card in the Ampere series with a tolerable level of power consumption. This implies that cooling needs will be much lower than with more powerful Ampere cards, which should be great news for those who don’t have a lot of space in their cases for bigger graphics cards. The most unique feature is Nvidia Broadcast, intended for gamers who want to stream their games.

The PowerColor AMD Radeon RX 6600 XT is designed to run next-generation games at 1080p, particularly when standard rasterization without flashy ray tracing effects is used. The Radeon RX 6600 XT is based on AMD’s rDNA 2 graphics architecture, which is manufactured at 7nm.

The AMD Radeon RX 6600 XT has 32 RDNA 2 compute units (CU), which equates to 2,048 Stream Processors (SP) and 32 ray accelerators (one per CU). The Boost clock of the AMD Radeon RX 6600 XT is 2,589MHz, while the Game Clock is 2,359MHz. Radeon Boost is another useful software function, particularly if you play a lot of fast-paced competitive shooters like Apex Legends.

The Sapphire RX 6800 XT Nitro+ is one of the most classic custom cards available. This graphics card has good cooling so the card runs cool and quiet. Despite being significantly bigger physically, it’s actually lighter than AMD’s reference card.

The Nitro+ has dimensions of 310x134x55.3mm and weighs just 1232g. It has increased the expected base and boost clocks for the card’s performance mode. The RX 6800 XT Nitro+ has clock speeds of 2,110MHz (base) and 2,360MHz (boost), and its beefier cooler should let it run at faster speeds for longer periods of time.

If you’re searching for a perfect hot rod to house that superfast GPU, look no further than EVGA’s RTX 3080 Ti FTW3 Ultra. This enormous, feature-laden flagship tames the RTX 3080 Ti in ways that Nvidia’s dual-slot Founders Edition just cannot. The FE card is almost as fast as the GeForce RTX 3090.

However, because of its substantial overclock and ample cooling, the FTW3 Ultra is as fast as an RTX 3090. The iCX sensors, which are nine extra thermal probes situated at strategically crucial points on the PCB: GPU, RAM, and VRM phases, are a unique feature of the 1440p gaming graphics card. In another light, the RTX 3080 Ti FTW3 Ultra is an incredibly high-quality custom graphics card that competes with standard RTX 3090 versions for $100 less.

Most premium custom-design AMD Radeon graphics cards are represented by PowerColor Radeon RX 6800 XT Red Devil. Dual DisplayPort, HDMI, and USB-C are all available on the Red Devil. The RX 6800 XT Red Devil outperforms last-generation GPUs, including the RTX 2080 Ti, in ray-traced games, particularly when DLSS is enabled on the GeForce cards.

This Radeon RX 6800 XT Red Devil includes dual-BIOS features that let the user choose between quiet with less overclocking or a little louder with more power-unlimited and higher overclocks. For the great majority of recent PC games that utilize rasterization, the standard RX 6800 XT is a very good alternative to GeForce Ampere cards for Radeon players. The RX 6800 XT has 16GB of GDDR6 memory compared to the RTX 3080s’ 10GB of GDDR6X.

The RX 6800 is built on the new RDNA2 graphics architecture, which supports the complete range of DirectX 12 Ultimate features such as real-time ray-tracing, variable-rate shading, mesh shaders, and sampler feedback. Ray-tracing requires massive processing power, which AMD almost quadrupled over the previous generation.

Even though it is not as powerful as the flagship Red Devil, the PowerColor Radeon RX 6800 Red Dragon may be regarded as a premium custom-design product. You still receive a triple-slot cooling system with a big aluminum fin-stack heatsink, a triple fan configuration with an idle fan stop, and a case-friendly all-metal shroud and backplate design.

The GeForce RTX 3070 is a superb GPU that delivers face-melting performance comparable to the previous $1,200 RTX 2080 Ti flagship for a fraction of the price. EVGA increased the boost clock on the FTW3 Ultra to 1,815MHz, giving it a jump in gaming frame rates right out of the box.

This 1440p gaming graphics card is using its iCX3 cooling system, which comprises three HDB 2.0 noise motor fans with noise-reducing fan blades. Not one, not two, but nine extra iCX3 sensors are built throughout the RTX 3070 FTW3 Ultra, allowing you to observe temperature measurements for various sections of your GPU, RAM, and voltage regulating systems.

The NVIDIA GeForce RTX 3060 Ti is intended to provide extreme quality gaming at 1440p resolution with RTX raytracing enabled, as well as competitive e-sports gaming at 1440p and 1080p at high refresh rates. NVIDIA’s design aim for the new Ampere series of GPUs was to greatly enhance the performance of real-time raytracing, bringing it to a wide range of uses.

The EVGA GeForce RTX 3060 Ti FTW3 Ultra has factory-overclocked rates for the silicon, with the GPU Boost frequency set to 1800 MHz. The GeForce RTX 3060 Ti has 8 GB of GDDR6 memory that operates at 14 Gbps via a 256-bit wide memory interface, resulting in a memory bandwidth of 448 GB/s.

Bit-tech received a Radeon RX 6700 XT Hellhound card from PowerColor for technical examination. Its dimensions of 305mm x 132mm x 50mm make it somewhat bigger than a strictly dual-slot affair, and its 1,172g weight and reinforced backplate indicate that it is a strong, well-made piece of equipment.

Hellhound follows AMD’s frequency line by using the same 2,581MHz boost clock. Memory is set to the standard 16Gbps. The middle 90mm is flanked by two 100mm fans. Hellhound features blue backdrop lighting – no RGB here – behind the spinners by default, although it can be turned off with a switch. Interestingly, despite the card’s zero-rpm mode, the switch-on/off threshold is determined by GPU load rather than temperature, implying that fan speed is more closely related to gameplay.

ZOTAC unveiled their GeForce RTX 3060 Ti Twin Edge graphics card, which heads the company’s slim portfolio of custom-designed Ampere graphics cards based on this GPU. The performance-segment graphics card approach has been to manufacture inexpensive and small graphics cards.

Frugal does not always imply “cheap,” since this 1440p gaming graphics card provides a free extended warranty upon product registration that is longer than the warranties of most other companies. The RTX 3060 Ti Ampere is NVIDIA’s most cheap GPU for this generation, aimed at a significantly larger audience. Overall, it is intended to provide 1440p AAA gaming with raytracing.

NVIDIA unveiled the GeForce GTX 1660 graphics card, doubling down on its notion of Turing-based GeForce GTX graphics cards that don’t support ray-tracing but provide performance boosts in raster graphics.

The ZOTAC GTX 1660 is meant to be cost-effective, and NVIDIA has ensured that it has the space to reduce prices even more in the future. The GTX 1660 is built on the Turing architecture and uses a TU116 silicon version. The GTX 1660, like the Super cards above and below it, utilizes GDDR6 video memory.